Late 280SLPAPER GASKET WITH 3 SCREW HOLES TO SEAL THE COLD START VALVE TO THE INTAKE MANIFOLD. LATE 280SLs ONLY.
RUBBER O-RING THAT SEALS THE COLD START VALVE ASSY. TO THE INTAKE MANIFOLD.Article code: v.nr.0029975245
CYLINDER HEAD GASKET Mercedes-Benz 230SL year vehicle attributes 1963 1964 1965 1966 Mercedes-Benz 250SE year vehicle attributes 1966 111.021 L6 2.5L 129.980 1966 111.021 L6 2.5L 129.981 1967 111.021 L6 2.5L 129.980 1967 111.021 L6 2.5L 129.981 1967 1968 111.021 L6 2.5L 129.980 1968 111.021 L6 2.5L 129.981 Mercedes-Benz 250SL year vehicle attributes 1967 129.982 Automatic 1967 129.982 Manual 1968 113.043 L6 2.5L 129.982
HEAD GASKET W108 W109 W113 280 model from 1967 to 1971
COPPER CRUSH RING FOR 26mm OIL DRAIN PLUG. USED ON ALL MODELS WITH ORIGINAL OIL PAN.Article code: v.nr.915035000025
USED WITH REPLACEMENT OIL PAN ON 250SLs FROM ENG. # 10-001176 & 12-001035 AND ALL 280SLs. ONLY FOR SMALL DRAIN PLUG FOR REPLACEMENT OIL PANS.
PREFORMED FRONT ENGINE SEAL. SHOULD ALSO REPLACE THE COLLAR SPACER RING # 03-2006 WHEN REPLACING THIS SEAL. ANY BURRS ON OLD COLLAR WILL CAUSE IMMEDIATE FAILURE OF NEW SEAL.Article code: v.nr.0089970547
Pad for Fuel Filler Neck for SL 107 Models 280/350/380/420/450 SLC 107 Models 280/350/380/450 SL 113 Models 230/250/280 from 1963 to 1985
VALVE GASKET 3 HOLE W113 280 Model from 1967 to 1971 SL107/SLC 107 280 from 1974 to 1980
VALVE GASKET 6 HOLE W113 Models from 1963 to 1971 SL107/SLC 107 280 from 1974 to 1980
Content: 1 Each (US$15.00 / 3 Each)
FITS ALL 230 & 250SLs. DOES NOT INCLUDE V/C GASKET # 01-2053 & VALVE SEALS # 05-2075 OR 05-2073.
FOR 280SL UP TO ENGINE # 10-004596 & 12-007229. DOES NOT INCLUDE V/C GASKET # 01-2053 OR VALVE SEALS # 05-2074.Article code: v.nr.1300103321
from Early 280SLLATER 280SL FROM ENG. # 10-004597 & 12-007230. WILL NOT INCLUDE V/C GASKET # 01-2053 OR VALVE SEALS # 05-2074.Article code: v.nr.1300103521
PAPER GASKET LOCATED BETWEEN THROTTLE BODY AND INTAKE MANIFOLD.Article code: v.nr.1271410179
ALL ENGINE BLOCK GASKETS & SEALS WITH V/C GASKET.Article code: v.nr.1290101708
ALL ENGINE BLOCK GASKETS & SEALS WITH V/C GASKET.Article code: v.nr.1300109608
THREADED PLUG Crankcase M42 X 1.5 Fits many Different Models 117 Shown in picture Be sure to check via MB 1179970230
RUBBER GASKET/SEAL FOR BETWEEN VALVE COVER AND CYLINDER HEAD.Article code: v.nr.1300160221