113 URETHANE SUSPENSION KIT (EARLY) 22 mm SWAY BAR THESE ARE BUSHINGS ONLY YOU WILL NEED TO REUSE YOUR EXSISTING HARDWARE
20.34MM FRONT SWAY BAR LATE STYLE KIT BUSHINGS ONLY YOU WILL HAVE TO USE YOUR EXISTING HARDWARE
22MM FRONT SWAY BAR EARLY KIT YOU WILL HAVE TO USE YOUR EXISTING HARDWARE
20.34MM FRONT SWAY BAR LATE KIT BUSHINGS ONLY YOU WILL HAVE TO USE YOUR EXISTING HARDWARE
Seal ring - Steering column to Steering Box for all W113 Pagoda models from 1963 to 1971
NOT AVAILABLE AT THIS TIME... PLEASE PROVIDE V.I.N.# IN THE SHIPPING INSTRUCTIONS BOX AT CHECKOUT WHEN ORDERING.Article code: v.nr.1133210404
For 190sl For 190,d & late 180b,c,db,dc from Chassis#02946. For 230sl 250sl 280sl. For all 107 Chassis.Article code: v.nr.0009815905
For 190sl For 190,d & late 180b,c,db,dc from Chassis#02946. For 230sl 250sl 280sl. For all 107 Chassis.Article code: v.nr.0009815805
1 KIT FOR ONE WHEEL, 2 KITS NEEDED PER CARArticle code: v.nr.1073300051
For 190,d & late 180b,c,db,dc For 190sl From Chassis #021755 For 230sl 250sl 280sl For EURO 380SL & 500SL W/ABSArticle code: v.nr.0039979346
IDLER ARM REPAIR KIT from Early 280SL W113 Chow in pic for reference FITS ALL 280SLs FROM CHASSIS # 000019 EXCEPT FOR 000091 & 000108. Is also used on the following chassis 107 108 109 111 113 114 115 116 123 126
It is the inner control arm seal rings for 1950’s to 1970’s cars. Priced Each. There are 8 per CarArticle code: v.nr. 1203330180
ALL MODELS WITH POWER STEERING. 13X750 1 PER CARArticle code: v.nr.0069970992
EXCHANGE REBUILT BOX ASSY. WILL FIT ALL 6 CYL MODELS. 4.5 V-8s AVAILABLE UPON SPECIAL REQUEST 3.5 MODELS ARE NOT AVAILABLE. PLEASE PROVIDE VEHICLE I.D. NUMBER IN THE SHIPPING INSTRUCTIONS BOX AT CHECKOUT.
REINFORCED RUBBER HOSE WITH SCREW ON METAL ENDS GOING FROM THE P/S PUMP TO BOX.Article code: v.nr.1099970882
EARLY STYLE PULLEY FOR P/S PUMPS WITH A REGULAR CYLINDRICAL SHAFT. NOT USED WITH THE REPLACEMENT PUMP # 46-3007.Article code: v.nr.1274660215
PULLEY USED WITH THE LATE STYLE P/S PUMP # 46-3007. PULLEY USED WITH PUMP HAVING A TAPERED OR CONICAL SHAPED SHAFT.Article code: v.nr.1274660315
FOR 1969-1971 280SL AND 1973-1975 450SL (117.982 UP TO 030108) LATE STYLE PUMP WITH TAPERED OR CONICAL SHAFT. IF INSTALLING ON A PRE-1969 VEHICLE OR ARE REPLACING A PUMP WITH THE CYLINDRICAL SHAFT, YOU MUST REPLACE THE PUMP PULLEY WITH PART # 46-2120B.
POWER STEERING PUMP SHAFT SEAL.Article code: v.nr.0189976047
2 O-RING KIT TO RESEAL P/S PUMP. DOES NOT INCLUDE THE FRONT SHAFT SEAL # 46-2310 WHICH SHOULD BE ORDERED SEPARATELY.Article code: v.nr.0005863146