113 URETHANE SUSPENSION KIT (EARLY) 22 mm SWAY BAR THESE ARE BUSHINGS ONLY YOU WILL NEED TO REUSE YOUR EXSISTING HARDWARE  

20.34MM FRONT SWAY BAR LATE STYLE KIT BUSHINGS ONLY YOU WILL HAVE TO USE YOUR EXISTING HARDWARE

22MM FRONT SWAY BAR EARLY KIT YOU WILL HAVE TO USE YOUR EXISTING HARDWARE

20.34MM FRONT SWAY BAR LATE KIT BUSHINGS ONLY YOU WILL HAVE TO USE YOUR EXISTING HARDWARE

EXHAUST BOLT STABILIZER END LINK BOLT ALL113 Chassis

CAP,STEERING

Seal ring - Steering column to Steering Box for all W113 Pagoda models from 1963 to 1971

NOT AVAILABLE AT THIS TIME... PLEASE PROVIDE V.I.N.# IN THE SHIPPING INSTRUCTIONS BOX AT CHECKOUT WHEN ORDERING.Article code: v.nr.1133210404

For 190sl For 190,d & late 180b,c,db,dc from Chassis#02946. For 230sl 250sl 280sl. For all 107 Chassis.Article code: v.nr.0009815905

For 190sl For 190,d & late 180b,c,db,dc from Chassis#02946. For 230sl 250sl 280sl. For all 107 Chassis.Article code: v.nr.0009815805

1 KIT FOR ONE WHEEL, 2 KITS NEEDED PER CARArticle code: v.nr.1073300051

Article code: v.nr.1115860033

Article code: v.nr.1103300318

ALL MODELS WITH POWER STEERING. 13X750 1 PER CARArticle code: v.nr.0069970992

FOR 1969-1971 280SL AND 1973-1975 450SL (117.982 UP TO 030108) LATE STYLE PUMP WITH TAPERED OR CONICAL SHAFT. IF INSTALLING ON A PRE-1969 VEHICLE OR ARE REPLACING A PUMP WITH THE CYLINDRICAL SHAFT, YOU MUST REPLACE THE PUMP PULLEY WITH PART # 46-2120B.

URETHANE FRONT SWAY BAR END LINK BUSHING QTY NEEDED PER CAR MODEL W108 (250/280) W109 (300/6.3) W110 (190/200/230) W111 (220/250/280) W112 (300) W113 (230/250/280SL) 8 8 8 8 8 8

RUBBER FRONT SWAY BAR TO FRAME QTY NEEDED PER CAR MODEL   W108 (250/280) W109 (300/6.3) W110 (190/200/230) W111 (220/250/280) W112 (300) W113 (230/250/280SL) Front sway bar to frame - 22mm        2 2 early 2 late Front sway bar to frame - 23.85mm   2     2 late    Front sway bar to frame - 20.34mm     2 2 early   2 late NOTE: Before selecting a front sway bar frame bushing, please measure the bar diameter first.   Use either a flexible tape or a pair of calipers as shown. Do not use a flat ruler.   With Calipers  With flexible tape If using an inch tape – take measurement and divide by 3.142 to get the diameter. To convert from inches to mm, simply multiply by 25.4. In both cases, this sway bar measures 24mm.

BILSTEIN BRAND, SHOCK ABSORBER - FRONTArticle code: v.nr.1133200030

Article code: v.nr.1113220585

Article code: v.nr.1113231140

Steering Lever Locking Plate W105  W108  W109  W110  W111  W112  W113  W120  W121  W128  W180  W186  W187  W188  W189  W191  W198   

Article code: v.nr.0004635132

Article code: v.nr.1103230485

Article code: v.nr.1135860032