METAL FILTER WITH PAPER INSERT APPROX. 6.75" IN DIAMETER. 230 & 250SL FROM TRANS. # 006750 UP TO 009935 AND THEN FROM 023011 THRU 280SL END.Article code: v.nr.1132700098
SAME LEFT & RIGHT. RUBBER HOSE WITH METAL FITTINGS ON BOTH ENDS, RADIATOR SIDE WITH 90 DEGREE ANGLE. METAL COIL REINFORCEMENT. 10" LENGTH, FROM RADIATOR TO METAL LINE TO TRANSMISSION.Article code: v.nr.0199978182
FULL GASKET & SEAL KIT, 230 & 250SL STANDARD TRANSMISSION.Article code: v.nr.1135860026
280SL STANDARD TRANSMISSION ONLY.Article code: v.nr.1135860126
ORIGINAL MB GASKET & SEAL KIT FOR ALL 113s WITH AUTO TRANS. WILL NOT INCLUDE FRONT & REAR SHAFT SEALS. ORDER ADDITIONALLY 1 OF 27-2039 FOR FRONT SEAL & 1 OF 27-2002 REAR SEAL.
CORK GASKET FOR TRANSMISSION OIL PAN.Article code: v.nr.1122710980
Front Subframe to Leaf Spring Sleeve All W113 Pagoda models from 1963 to 1971
URETHANE FRONT SWAY BAR TO FRAME QTY NEEDED PER CAR MODEL W108 (250/280) W109 (300/6.3) W110 (190/200/230) W111 (220/250/280) W112 (300) W113 (230/250/280SL) Front sway bar to frame - 22mm 2 2 early 2 late Front sway bar to frame - 23.85mm 2 2 late Front sway bar to frame - 20.34mm 2 2 early 2 late NOTE: Before selecting a front sway bar frame bushing, please measure the bar diameter first. Use either a flexible tape or a pair of calipers as shown. Do not use a flat ruler. With Calipers With flexible tape If using an inch tape – take measurement and divide by 3.142 to get the diameter. To convert from inches to mm, simply multiply by 25.4. In both cases, this sway bar measures 24mm.
URETHANE FRONT LEAF SPRING BUSHING QTY NEEDED PER CAR MODEL W108 (250/280) W110 (190/200/230) W111 (220/250/280) W113 (230/250/280SL) 4 4 4 4
URETHANE FRONT LEAF SPRING BUSHING QTY NEEDED PER CAR MODEL W109 (300/6.3) W112 (300) 4 4
URETHANE TRAILING ARM REAR (TO AXLE) QTY NEEDED PER CAR MODEL SOLD PER BUSHING SLEEVE NOT SOLD SEPERATELY W108 (250/280) W109 (300/6.3) W110 (190/200/230) W111 (220/250/280) W112 (300) W113 (230/250/280SL) 4 4
HOSE SOLD IN METER LENGTHS, PLEASE STATE CHASSIS # IN SHIPPING INSTRUCTIONS BOX WHEN ORDERINGArticle code: v.nr.0004352182
Late 280SL HOSE WITH FITTED ENDS AND CHECK VALVE. For 280SL FROM CHASSIS # 011948 TO PRODUCTION END. EARLIER HOSE WITH 90 DEGREE ENDS IS NO LONGER AVAILABLE.Article code: v.nr.1134300629
RUBBER GASKET/SEAL FOR BETWEEN VALVE COVER AND CYLINDER HEAD.Article code: v.nr.1300160221
VALVE COVER TUBE - PLASTIC 230SL — Chassis 113.042 1963 - 1966 Base Convertible 2.3L L6 250SE — Chassis 111.023 1966 - 1967 Base Convertible 2.5L L6 250SE — Chassis 108/111 1966 - 1967 Base Coupe 2.5L L6 250SL — Chassis 113.043 1967 Base Convertible 2.5L L6 280SE — Chassis 108/111 1968 - 1969 Base All 2.8L L6
BRASS OR COPPER GUIDE IN CYLIDER HEAD FOR INTAKE VALVE. STANDARD SIZE 14X9X55. 6 PER CAR.Article code: v.nr.1300500024
BRASS OR COPPER GUIDE IN CYLINDER HEAD FOR INTAKE VALVES. REPAIR SIZE OF +.001 OVER STANDARD 14mm O.D. LARGER REPAIR SIZES ARE AVAILABLE UPON SPECIAL REQUEST.Article code: v.nr.1300500124
BRASS OR COPPER GUIDE IN CYLIDER HEAD FOR INTAKE VALVE. STANDARD SIZE 14X9X55. 6 PER CAR.