1ST REPAIR SIZE 47.85mm. 12 SHELLS FOR 6 RODS.Article code: v.nr.1140300060

2ND REPAIR SIZE, 47.50mm. 12 SHELLS FOR 6 ARMS.Article code: v.nr.1270300260

2ND REPAIR SIZE, 47.5mm. 12 SHELLS FOR 6 RODS.Article code: v.nr.1080300260

280SL2ND REPAIR SIZE 47.50mm. 12 SHELLS FOR 6 RODS.Article code: v.nr.1140300160

STANDARD SIZE 48mm. 12 SHELLS FOR 6 RODS.Article code: v.nr.1270300060

STANDARD SIZE, 48mm. 12 SHELLS FOR 6 RODS.Article code: v.nr.1080300060

48mm STD SIZE.Article code: v.nr.1140300460

ALL EARLY 6 CYLINDER AND For Distributor #15-0070Article code: v.nr.0001582731

12 PER CAR TO ROTATE VALVES WHILE OPENING & CLOSING TO PREVENT BURN. 230SL ROTATORS ARE NO LONGER AVAILABLE.

Article code: v.nr.1113330265

URETHANE FRONT SWAY BAR END LINK BUSHING QTY NEEDED PER CAR MODEL W108 (250/280) W109 (300/6.3) W110 (190/200/230) W111 (220/250/280) W112 (300) W113 (230/250/280SL) 8 8 8 8 8 8

RUBBER FRONT SWAY BAR TO FRAME QTY NEEDED PER CAR MODEL   W108 (250/280) W109 (300/6.3) W110 (190/200/230) W111 (220/250/280) W112 (300) W113 (230/250/280SL) Front sway bar to frame - 22mm        2 2 early 2 late Front sway bar to frame - 23.85mm   2     2 late    Front sway bar to frame - 20.34mm     2 2 early   2 late NOTE: Before selecting a front sway bar frame bushing, please measure the bar diameter first.   Use either a flexible tape or a pair of calipers as shown. Do not use a flat ruler.   With Calipers  With flexible tape If using an inch tape – take measurement and divide by 3.142 to get the diameter. To convert from inches to mm, simply multiply by 25.4. In both cases, this sway bar measures 24mm.

RUBBER HOSE FROM FLUID RESERVOIR TO METAL LINE LEADING TO MASTER CYLINDER. 230SL & 250SL UP TO CHASSIS # 002979.Article code: v.nr.0012956807

SEAL FOR FUEL TANK DRAIN PLUG & SCREEN.Article code: v.nr.0229970648

Article code: v.nr.915035000023

W113 230SL 250SL 280SL Manual Transmission Speedometer Cable Seal Ring at Transmission Also works on Various other models Please verify by OEM number

STANDARD TRANSMISSION - FLOOR SHIFTArticle code: v.nr.1112680497

PLASTIC BUSHING ON BOTH ENDS OF SELECTOR ROD GOING FROM SHIFT LEVER HOUSING TO SIDE OF TRANSMISSION. 2 PER CAR, AUTOMATIC TRANSMISSION ONLY.Article code: v.nr.1122680150

BUSHING IN EITHER SIDE OF SHIFTER MOUNTING PLATE WHERE SHIFT LEVER MEETS HORIZONTAL SHAFT. PLEASE PROVIDE VIN # IN THE SHIPPING INSTRUCTIONS BOX AT CHECKOUT. 2 PER CARArticle code: v.nr.1119920210

WHITE PLASTIC PLATE COVERING METAL SHIFTER MOUNTING PLATE. ACCEPTS RUBBER SHIFT BOOT, HELD WITH 4 SCREWS.Article code: v.nr.1112680398

230SL 250SL 280SLArticle code: v.nr.1132600028

BLACK - AUTOMATIC TRANSMISSIONArticle code: v.nr.1132670010

4 SPEED MANUAL.Article code: v.nr.1112680942

4 SPEED MANUAL - PRESS ON STYLEArticle code: v.nr.111268094226